Climax FF4000 FLANGE FACER - Manual (Page 2)

US Metric
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 2
SPECIFICATIONS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Flange Facing Diameter 3.0 - 19.0 inches 88.9 - 482.6 mm
Beveling Diameter 3.0 - 12.75 inches 76.2 - 323.9 mm
(with optional beveling head)
Pipe Facing Diameter 3.0 - 12.75 inches 76.2 - 177.8 mm
(with optional beveling head)
ID Mounting Diameter 3.0 - 12.5 inches 88.9 - 317.5 mm
Feed rate (reversible, variable) 0.002 to 0.040 inches/rev. 0 to 1.016 mm/rev.
Power, Pneumatic 1.45 Hp 1.08 kW
Power Requirement 48 scfm, 90 psi 1.36 m 3 /min, 629 kPa
Operating Weight
With 19 inch (482.6 mm) facing head 66 lbs 29.9 kg
With 12 inch (304.8 mm) beveling head 60 lbs 27.2 kg
Shipping Weight 250 lbs 113.4 kg
Shipping Dimensions (2 containers) 33 x 21 x 11 inches 838 x 533 x 279 mm
Configure your FF4000 in 2 easy steps.
To configure your FF4000 Flange Facer:
1 Select a Base Package
2 Select a Facing Head
To configure the flange facer you require, simply select the option
you need in each step, then contact your Climax representative.
1 Base Package
Main machine with 1.45 Hp (1.08 kW) 49593
pneumatic motor with air conditioning unit,
tooling, chuck, and chuck block set. Unit
comes packaged in a durable molded container.
2 Facing Head
12 inch (304.8 mm) facing head 35222
19 inch (482.6 mm) facing head 34936
7 inch (177.8 mm) beveling head 34980
12.75 inch (323.9 mm) beveling head 35439
Optional Facing/Beveling Bits:
Facing bit 33141
Beveling bit 37.5 degrees 33136
Roughing tool bit 31867
Finishing tool bit 31858
5 degree chamfer tool bit 33315
Optional Facing/Beveling Heads:
Beveling head 7 inches (177.8 mm) 34980
Beveling head 12.75 inches (323.9 mm) 35439
Facing head, 3 - 12 inch (76.2 - 35222
304.8 mm) diameter
Facing head, 3 - 19 inch (76.2 - 34936
482.6 mm) diameter
Tool Configurations
Chuck Clamp blade set
Feed adjust
Swivel fitting
Ball valve
Main body
Draw bar knob
Facing head
Pneumatic motor