Climax VM1200 GATE VALVE GRINDING & LAPPING - Manual (Page 6)

Mrz-06 / VM1150-1200 Gate Valve Grinding & Lapping Machine Brochure.doc
Page 6 of 9
Accessories
P/N Description
240-13K-001 Maintenance unit for pneumatic motor
Required for machines with pneumatic motor.
The maintenance unit is not included in the standard scope
of supply with pneumatic driven machines.
Includes:
• filter
• oiler
• pressure
gauge
• speed
controller
420-00S-L03 Swing Check accessories
For grinding of swing check valves.
Includes:
•
Swivel adapter for adaption of the machine on the
valve
•
Spindle extension for reaching the seat with the planet
wheels.
420-56S-N01 Fixture for gate wedges
For grinding of gate wedges “on site” with the VM machines.
Extension of submerging depth
Extension of submerging depth without changing the max.
grinding diameter
(Must be ordered with the machine. Can not be ordered
after delivery of the machine.
e.g... 420-00S-S05-M01)
- M01 Extension of submerging depth from 16“ to 18“
(400 mm to 450 mm)
•
Extension of the machine arm.
•
Adaption of the machine case.
110-33S-N01 CBN grinding disk 2”(50 mm) diameter (each)
(A total of five required)
Required for rough grinding of heavily damaged seats
(not included in the component package).
110-41S-N01
Lapping disk 1.2”(30 mm) diameter (each)
(A total of five required)
110-42S-N01
Lapping disk 2”(50 mm) diameter (each)
(A total of five required)