Climax VM2150C GLOBE/SAFETY VALVE GRINDING & LAPPING - Manual (Page 5)

20.02.2006 / VM2050C-2150C Conical Seat Glove Valve Machine Brochure Conical Seat Globe Valve Grinding Machines
Page 5 of 6
Model VM2150C
P/N Description
Globe Valve Grinder VM2150C basic package
The basic package includes all accessories except the grinding
cones and abrasives. These items have to be purchased sepa-
rately depending on the seat angles.
Nominal working diameter 0.4 “ to 6“ (10 mm to 150 mm)
Submerging depth 450 mm (18“).
Scope of supply:
•
Machine with quick change coupling to accept the grinding
spindle.
• Grinding spindle diameter 0.6” (15.0 mm) for grinding seats
up to 0.6” (15.0 mm) diameter. Submerging depth 6’’(150 mm)
•
Grinding spindle diameter 1.0 “(25.0 mm) for grinding seats
up to 6.0” (150 mm). Submerging depth 10’’ (250 mm).
•
Grinding spindle diameter 1.0 “(25.0 mm) for grinding seats
up to 6.0” (150 mm). Submerging depth 18’’ (450 mm).
•
Centering cone for 0.6” (15.0 mm) diameter grinding spindle
•
Two centering cones for 1.0 “(25.0 mm) diameter grinding
spindle
•
1 set of tooling.
• Carrying cases with foam inlet for the machine and the
accessories.
320-00S-L22 VM2150C with electric motor 230 V / 50 Hz
320-00S-L23 VM2150C with pneumatic motor
320-00S-L25 VM2150C with electric motor 115 V / 60 Hz
240-13K-001 Maintenance unit for pneumatic motor
Required for machines with pneumatic motor.
The maintenance unit is not included in the standard scope of
supply with pneumatic driven machines.
Includes:
• filter
• oiler
• pressure
gauge
• speed
controller