Climax LM6200 LINEAR/GANTRY MILL - Manual (Page 7)

Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 7
OPERATIONAL DIMENSIONS
Inverted Milling Area
* Without riser assembly. 5" (127.0 mm) required to clear bed assembly.
** Dimensions shown are with RAM at max recommended offset.
28" (711.2 mm)*
24.7" (627.4 mm)*
20" (508.0 mm)*
47.5" (1206.5 mm) with 26" (660.4 mm) Travel RAM
71.5" (1816.1 mm) with 38" (965.2 mm) Travel RAM
** 71.5" (1816.1 mm) with 72" (1828.8 mm) Travel RAM
20.7" (525.8 mm)
8.9" [226mm]
RETRACTED
.9" [23mm]
EXTENDED
8.0" [203mm]
TRAVEL
GEARBOX
MOTOR MAY BE ROTATED IN
90° INCREMENTS; MAY ALSO BE
MOUNTED ON THE UNDERSIDE
OF THE GEARBOX
Gearbox
Gearbox can be rotated in 90° increments;
motor may also be mounted on the
underside of the gearbox
8.9" (226.1 mm)
Retracted
0.9" (22.9 mm)
Extended
8" (203.2 mm)
Travel
Spindle Travel
Dimensions in Inch (mm)