Firmware version – MoTeC MDD User Manual
Page 4
2 Introduction
Firmware Version
The program inside the MDD is called “firmware”. The firmware determines the
capabilities of the MDD.
This document is current for firmware version V1.18
Updating the Firmware Version
Over time newer firmware versions will be released that may have additional
capabilities or display layouts.
Updating the firmware requires special equipment. This can be performed by
the MoTeC dealers listed below:
• MoTeC Pty Ltd Australia
• MoTeC Systems USA
• MoTeC Europe Ltd
• MoTeC Japan
• MoTeC Queensland
See also other documents in the category MoTeC Hardware:
- ADR (25 pages)
- ACL VIM (99 pages)
- ADL EDL (81 pages)
- ADL2 EDL2 (82 pages)
- ADL3 EDL3 (80 pages)
- AFM1 (20 pages)
- BR2 BTX (47 pages)
- BRX (21 pages)
- C125 (89 pages)
- C185 (85 pages)
- CDL3 (86 pages)
- DBW-4 (21 pages)
- Display Creator (66 pages)
- E888 (30 pages)
- GPS-BL1 (8 pages)
- GPS-G1 (7 pages)
- GPS-L5 (8 pages)
- Interpreter (37 pages)
- Knock SKM (36 pages)
- LTC (39 pages)
- M1 Series Quick Start Guide (1 page)
- M1 Tune User Manual (77 pages)
- M4 (63 pages)
- M400 (101 pages)
- M84 (86 pages)
- MDC (22 pages)
- MDC2 (20 pages)
- PDM16 (61 pages)
- PLM (59 pages)
- PWC Plug-In ECU (91 pages)
- Screwdriver ECU (5 pages)
- SDC3 (24 pages)
- SDL (70 pages)
- SDL3 (76 pages)
- Snowmobile Plug-In ECU (46 pages)
- VCS (36 pages)