Atec Rohde-Schwarz_FSL Series - Manual (Page 38)

R&S ® FSL Spectrum Analyzer Version 09.00, December 2008 38
Measurement uncertainty (nominal)
level 30 dBm to +15 dBm, average of 20 bursts
f = 2.4 GHz
DL
28 , UL 29
channel estimation: preamble and payload
40 dB
f = 5 GHz
Residual EVM 27
DL 28 , UL 29
channel estimation: payload
37 dB
Frequency error
Max. measurement frequency window DL 28 , UL 29 30 ppm
Uncertainty 1 Hz + R&S ® FSL frequency uncertainty
(see R&S ® FSL reference frequency)
test of spectrum mask like the R&S ® FSL
(see R&S ® FSL total measurement
uncertainty)
output power like the R&S ® FSL
(see R&S ® FSL total measurement
uncertainty)
Level uncertainty
ACPR (adjacent channel power ratio) like the R&S ® FSL
(see R&S ® FSL total measurement
uncertainty)
References
[1] IEEE 802.16-2004, IEEE Standard for Local and Metropolitan Area Networks. October 1, 2004.
[2] IEEE 802.16e-2005 and IEEE 802.16-2004/Cor1-2005. February 28, 2006. Amendment 2: Physical and Medium Access Control
Layers for Combined Fixed and Mobile Operation in Licensed Bands and Corrigendum 1.
[3] P802.16-Rev2/D2 (December 2007) (is a revision of IEEE 802.16-2004 and consolidates material from IEEE 802.16e-2005, IEEE
802.16-2004/Cor1-2005, IEEE 802.16f-2005 and IEEE 802.16g-2007).
[4] P802.16-Rev2/D3 (February 2008) (is a revision of IEEE 802.16-2004 and consolidates material from IEEE 802.16e-2005, IEEE
802.16-2004/Cor1-2005, IEEE 802.16f-2005 and IEEE 802.16g-2007).
[10] ETSI EN 301 021 V1.6.1 (2003-07). Fixed radio systems; point-to-multipoint equipment; time division multiple access (TDMA);
point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz.
27 Valid for R&S ® FSL3 with tracking generator serial number ≥100704, R&S ® FSL6 with tracking generator serial number ≥100605,
R&S ® FSL3 serial number ≥100946, R&S ® FSL6 serial number ≥100760, R&S ® FSL18.
28 This result is based on the following downlink signal: BW = 8.75 MHz, N
FFT
= 1024, all 30 subchannels assigned to segment 0.
The segment contains a downlink PUSC zone with one burst of 30 subchannels and 30 OFDMA symbols using a QPSK modulation format.
29 This result is based on the following uplink signal: BW = 8.75 MHz, N
FFT
= 1024, all 35 subchannels being used.
The uplink PUSC zone contains one burst of 35 subchannels and 30 OFDMA symbols using a QPSK modulation format.