Atec Rohde-Schwarz_FSL Series - Manual (Page 34)

R&S ® FSL Spectrum Analyzer Version 09.00, December 2008 34
result list
EVM, I/Q offset, frequency error, clock
error
spectrum flatness
spectrum flatness difference
spectrum mask
Limit check values in line with standard
IEEE 12 , ETSI 13 , user-definable
Measurement uncertainty (nominal)
level
30 dBm to +15 dBm, average of 20 bursts
f = 2.4 GHz
DL 15 , UL 16
channel estimation: preamble and
payload
40 dB
f = 5 GHz
Residual EVM 14
DL 15 , UL 16
channel estimation: preamble and
payload
37 dB
Frequency error
Max. measurement frequency window DL 15 , UL 16 50 ppm
Uncertainty 1 Hz + R&S ® FSL frequency uncertainty
(see R&S ® FSL reference frequency)
test of spectrum mask like the R&S ® FSL
(see R&S ® FSL total measurement
uncertainty)
output power like the R&S ® FSL
(see R&S ® FSL total measurement
uncertainty)
Level uncertainty
adjacent channel power ratio (ACPR) like the R&S ® FSL
(see R&S ® FSL total measurement
uncertainty)
12 In line with [1] IEEE 802.16-2004.
13 In line with [10] ETSI EN 301 021 V1.6.1 (2003-07).
14 Valid for R&S ® FSL3 with tracking generator serial number ≥100704, R&S ® FSL6 with tracking generator serial number ≥100605,
R&S ® FSL3 serial number ≥100946, R&S ® FSL6 serial number ≥100760, R&S ® FSL18.
15 This result is based on the following downlink signal: BW = 10 MHz, T
g
/T
b
= 1/8. The downlink subframe contains one burst of 30 OFDM symbols using
a QPSK modulation format.
16 This result is based on the following uplink signal: BW = 10 MHz, T
g
/T
b
= 1/8. The uplink subframe contains one burst of 30 OFDM symbols using a
QPSK modulation format.