Atec Rohde-Schwarz_FSL Series - Manual (Page 16)

R&S ® FSL Spectrum Analyzer Version 09.00, December 2008 16
EDR relative TX power
Measurements
GFSK and DPSK power in line with
Bluetooth
® RF test specification 2.0.E.3,
5.1.12
Measurement range –40 dBm to +20 dBm
Level uncertainty <0.7 dB
Packet type 2-DHx, 3-DHx, 2-EVx, 3-EVx
Payload PRBS9
Synchronization GFSK access code and DPSK
synchronization sequence
Trigger IF power, external, free run
EDR frequency stability
Measurements
frequency error initial (

i
), per block (

0
)
and total (

i
+

0
) in line with Bluetooth ®
RF test specification 2.0.E.3, 5.1.13
Measurement range ±250 kHz
frequency error initial,
signal level >–25 dBm <1 kHz + carrier frequency × reference
error Uncertainty
frequency error per block,
signal level >–25 dBm <1 kHz
Packet type 2-DHx, 3-DHx, 2-EVx, 3-EVx
Payload PRBS9
Synchronization
Trigger
IF power, external, free run
EDR modulation accuracy
Measurements
RMS, peak and 99 % DEVM in line with
Bluetooth
® RF test specification 2.0.E.3,
5.1.13
RMS, signal level >–25 dBm <3 % Uncertainty
peak, signal level >–25 dBm <8 %
Packet type 2-DHx, 3-DHx, 2-EVx, 3-EVx
Payload PRBS9
Synchronization GFSK access code and DPSK
synchronization sequence
Trigger IF power, external, free run
EDR differential phase encoding
Measurements
bit error detection in line with Bluetooth ®
RF test specification 2.0.E.3, 5.1.14
Packet type 2-DHx, 3-DHx, 2-EVx, 3-EVx
Payload PRBS9
Synchronization GFSK access code and DPSK
synchronization sequence
Trigger IF power, external, free run
EDR in-band spurious emissions
Measurements
adjacent channel power and power
between 1 MHz and 1.5 MHz from carrier
in line with Bluetooth
® RF test
specification 2.0.E.3, 5.1.15
Level range max. +10 dBm
Packet type 2-DHx, 3-DHx, 2-EVx, 3-EVx
Payload PRBS9
Synchronization gated measurement
Trigger IF power, external, free run