Atec Rohde-Schwarz_FSL Series - Manual (Page 10)

R&S ® FSL Spectrum Analyzer Version 09.00, December 2008 10
Inputs and outputs
RF input R&S ® FSL3 and R&S ® FSL6
Impedance 50 Ω
Connector N female
RF attenuation ≥ 10 dB
10 MHz ≤ f ≤ 1 GHz nominal 1.2
VSWR
1 GHz < f ≤ 6 GHz nominal 1.5
Input attenuator 0 dB to 50 dB in 5 dB steps
RF input R&S ® FSL18
Impedance 50 Ω
Connector N female
RF attenuation ≥ 10 dB
10 MHz ≤ f ≤ 8 GHz nominal 1.2
8 GHz < f ≤ 16 GHz nominal 1.5
VSWR
f > 16 GHz nominal 2
Input attenuator 0 dB to 40 dB in 5 dB steps
AF output
Connector
3.5 mm mini jack
Output impedance <100 Ω
Open-circuit voltage up to 1.5 V, adjustable
Tracking generator (models .13, .16 and .28 only)
Connector
N female, 50 Ω
R&S ® FSL3, R&S ® FSL6 –50 dBm to 0 dBm in 1 dB steps Output power setting range
R&S ® FSL18 –30 dBm to 0 dBm in 10 dB steps
R&S ® FSL3 1 MHz to 3 GHz
R&S ® FSL6 1 MHz to 6 GHz
Frequency range
R&S ® FSL18 10 MHz to 18 GHz
RF attenuation = 0 dB, source power 0 dBm
10 MHz to 2 GHz
nominal 80 dB
Dynamic range for isolation
measurements
2 GHz to f
max
nominal 60 dB
Reverse power
DC voltage 50 V
CW RF power 30 dBm (= 1 W)
Max. pulse voltage 150 V
Max. pulse energy (10 µs) 10 mWs
External reference
Connector
BNC female, 50 Ω
Input level 0 dBm to +10 dBm
Output level with R&S ® FSL-B4 typ. 0 dBm
Frequency 10 MHz ±5 ppm
External trigger/gate input
Connector
BNC female, 50 Ω
Input level TTL compatible
Probe power +15 V DC, –12.6 V DC and ground,
max. 150 mA, nominal
External monitor
Connector
DVI-D