Atec Rohde-Schwarz_FSL Series - Manual (Page 17)

Version 09.00, December 2008 R&S ® FSL Spectrum Analyzer 17
R&S
®
FSL-K20 cable TV measurements
The R&S ® FSL-K20 option for the R&S ® FSL spectrum analyzer makes it possible to perform measurements on analog and digital
modulated TV signals in cable networks and also simplifies such measurements.
The option includes a software demodulator for analyzing digital TV signals and an internal TV trigger for analyzing analog TV signals.
General
Frequency
Range
vision carrier frequency with analog
modulation or carrier frequency with digital
modulation 5 MHz to 1.5 GHz
a channel table is used selection of a channel and/or
direct input of frequency Selection of measurement frequency
no channel table is used direct input of frequency
Channel tables
Characteristics
The number of channel tables that can be saved is limited only by the memory capacity
of the instrument.
Max. 400 channels in each channel table.
Channel bandwidths from 0.1 MHz to 10 MHz.
Max. 50 modulation standards, i.e. signal characteristic sets, can be present in each
channel table. The modulation standard assigned to the active channel automatically
configures each measurement.
Channel tables can be generated and edited on the instrument at any time.
The most important standard channel tables and modulation standards are included.
Manual measurements Operation is also possible without channel tables, in which case the user must select
the measurement parameters.
Analog TV
TV standards B/G, D/K, I, K1, L, M, N
Color system PAL / SECAM / NTSC
FM 5.5 MONO
FM 5.5 / FM 5.742 B/G
FM 5.5 / NICAM 5.85
FM 6.5 MONO
FM 6.5 / FM 6.742
FM 6.5 / FM 6.258
D/K/K1
FM 6.5 / NICAM 5.85
FM 6.0 MONO
I
FM 6.0 / NICAM 6.552
AM 6.5 MONO
L
AM 6.5 / NICAM 5.85
FM 4.5 MONO
FM 4.5 / FM 4.724
FM 4.5 BTSC
Sound systems
M, N
FM 4.5 EIA-J