Atec Rohde-Schwarz_FSL Series - Manual (Page 30)

R&S ® FSL Spectrum Analyzer Version 09.00, December 2008 30
DSSS/CCK/PBCC analysis (IEEE 802.11b, IEEE 802.11g CCK)
Frequency
Frequency range
R&S ® FSL3 50 MHz 6 to 3 GHz
R&S ® FSL6 50 MHz 6 to 6 GHz
RF input
R&S ® FSL18 50 MHz 6 to 18 GHz (overrange 20 GHz)
Frequency setting frequency
channel number
Level
Level range RF input up to +30 dBm
Level setting autorange
manual
Signal acquisition
Supported standards IEEE 802.11b, IEEE 802.11g (CCK)
Modulation format DBPSK, DQPSK, CCK,
short PLCP, long PLCP
5.5 Mbps, 11 Mbps PBCC
Demodulator setting auto
manual with/without test of signal field
Capture length continuous 24 µs to 11.9 ms
Number of bursts that can be analyzed manual 1 to 10922
PVT, spectrum FFT, CCDF capture length, 1 to 10922 bursts or gate
length Result length
EVM versus symbol and versus carrier
constellation versus symbol
bit stream
PLCP header capture length, 1 to 10922 bursts
Burst length automatic detection of number of data
symbols
manual 1 to 4095 bytes
Triggering free run, IF power, external
6 1 MHz to 50 MHz with restricted functionality depending on bandwidth (power trigger, auto level, IF overload).