Atec Agilent-E8364A - Manual (Page 7)

7
Extended configuration and standard power range (E8363/4A-Option 014)
Applies to E8363/4A PNA Series analyzer, 85056A (2.4 mm) calibration kit, 85133F flexible test port
cable set, and a full two-port calibration. (Specifications apply over environmental temperature of 23°
±3°C, with less than 1°C deviation from calibration temperature.)
Description Specification (dB)
0.045 kHz to 2 GHz
2 to 10 GHz 10 to 20 GHz 20 to 40 GHz 40 to 50 GHz
Directivity 42 42 42 38 36
Source match 41 38 38 33 31
Load match 42 42 42 37 35
Reflection tracking ±(0.001 + 0.2/°C) ±(0.008 + 0.2/°C) ±(0.008 + 0.2/°C) ±(0.020 + 0.3/°C) ±(0.027 + 0.4/°C)
Transmission tracking ±(0.019 + 0.2/°C) ±(0.039 + 0.2/°C) ±(0.053 + 0.2/°C) ±(0.114 + 0.3/°C) ±(0.215 + 0.4/°C)
Crosstalk (reflection port to < -85 (to 500 MHz)
transmission port: short < -100 (from 500 MHz) < -110 < -110 < -110 < -110
circuits at both ports;
isolation calibration
applied)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
Uncertainty (dB)
E8363/4A 014 full 2-port cal using 85056A
S11 = S22 = 0
Source power = -17 dBm
■ 45 MHz to 2 GHz
◆ 2 GHz to 20 GHz
▲ 20 GHz to 40 GHz
● 40 GHz to 50 GHz
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
Uncertainty (degrees)
E8363/4A 014 full 2-port cal using 85056A
S11 = S22 = 0
Source power = -17 dBm
■ 45 MHz to 2 GHz
◆ 2 GHz to 20 GHz
▲ 20 GHz to 40 GHz
● 40 GHz to 50 GHz
Magnitude
0
0.01
0.02
0.03
0.04
0.05
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
Uncertainty (linear)
E8363/4A 014 with 85056A
S21 = S12 = 0
Source power = -17 dBm ■ 45 MHz to 2 GHz
◆ 2 GHz to 20 GHz
▲ 20 GHz to 40 GHz
● 40 GHz to 50 GHz
Phase
0
2
4
6
8
10
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
Uncertainty (deg)
E8363/4A 014 with 85056A
S21 = S12 = 0
Source power = -17 dBm
■ 45 MHz to 2 GHz
◆ 2 GHz to 20 GHz
▲ 20 GHz to 40 GHz
● 40 GHz to 50 GHz