Atec Agilent-E8364A - Manual (Page 14)

14
Uncorrected system performance
1
Description Specification Supplemental information
Directivity Typical:
45 MHz to 2 GHz 24 dB 29 dB
2 to 10 GHz 22 dB 25 dB
10 to 20 GHz 16 dB 20 dB
20 to 40 GHz 16 dB 20 dB
40 to 45 GHz 15 dB 18 dB
45 to 50 GHz 13 dB 18 dB
Source match - standard Typical:
45 MHz to 2 GHz 23 dB 27 dB
2 to 10 GHz 16 dB 19 dB
10 to 20 GHz 14 dB 19 dB
20 to 40 GHz 10 dB 14 dB
40 to 45 GHz 9 dB 13.5 dB
45 to 50 GHz 5.5 dB 9 dB
Source match - Option UNL, 014, or UNL and 014 Typical:
45 MHz to 2 GHz 18 dB 22.5 dB
2 to 10 GHz 14 dB 18 dB
10 to 20 GHz 12 dB 15 dB
20 to 40 GHz 8 dB 10 dB
40 to 45 GHz 7 dB 10 dB
45 to 50 GHz 4 dB 6.5 dB
Load match - standard Typical:
45 MHz to 2 GHz 23 dB 29 dB
2 to 10 GHz 14 dB 16 dB
10 to 20 GHz 10 dB 12 dB
20 GHz to 40 GHz 9 dB 12 dB
40 to 45 GHz 9 dB 13 dB
45 to 50 GHz 7 dB 10 dB
Load match - Option UNL, 014, or UNL and 014 Typical:
45 MHz to 2 GHz 17 dB 21.5 dB
2 to 10 GHz 13 dB 16.5 dB
10 to 20 GHz 10 dB 13 dB
20 to 40 GHz 9 dB 11 dB
40 to 45 GHz 8 dB 11 dB
45 to 50 GHz 6 dB 8 dB
Reflection tracking Typical:
45 MHz to 20 GHz ±1.5 dB
20 to 40 GHz ±1.5 dB
40 to 50 GHz ±2.0 dB
Transmission tracking 2 Typical:
45 MHz to 2 GHz ±1.5 dB
2 to 10 GHz ±2.0 dB
10 to 20 GHz ±2.5 dB
20 to 40 GHz ±3.5 dB
40 to 45 GHz ±4.0 dB
45 to 50 GHz ±4.5 dB
1. Specifications apply over environment temperature of
23°C, with less than 1°C deviation from the calibration
temperature.
2. Transmission tracking performance is strongly
dependent on cable used; These typical specifications
are set based on the use of Agilent thru cable part
number 85133-60016.