Atec Agilent-E8364A - Manual (Page 16)

16
Test port output
1
Description Specification Supplemental information
Standard 014 UNL UNL and 014
Frequency range
E8362A 45 MHz to 20 GHz
E8363A 45 MHz to 40 GHz
E8364A 45 MHz to 50 GHz
Nominal power -12 dBm -17 dBm -17 dBm -17 dBm
Frequency resolution 1 Hz 1 Hz 1 Hz 1 Hz
CW accuracy ± 1ppm ± 1ppm ± 1ppm ± 1ppm
Frequency stability ±1 ppm 0 to 40°C, typical
±0.2 ppm/yr, typical
Power level accuracy
45 MHz to 10 GHz ±1.5 dB ±1.5 dB ±1.5 dB ±1.5 dB Variation from nominal
10 to 20 GHz ±2.0 dB ±2.0 dB ±2.0 dB ±2.0 dB power in range 0
20 to 40 GHz ±3.0 dB ±3.0 dB ±3.0 dB ±3.0 dB (step attenuator at 0 dB).
40 to 45 GHz ±3.0 dB ±3.5 dB ±3.0 dB ±3.5 dB
45 to 50 GHz ±3.0 dB ±4.0 dB ±3.0 dB ±4.0 dB
Power level linearity
45 MHz to 20 GHz ±1.0 dB ±1.0 dB ±1.0 dB 2 ±1.0 dB 2 Test reference is at the
20 to 40 GHz ±1.0 dB ±1.0 dB ±1.0 dB 2 ±1.0 dB 2 nominal power level
40 to 50 GHz ±1.0 dB ±1.0 dB ±1.0 dB ±1.0 dB (step attenuator at 0 dB).
Power range 3
45 MHz to 10 GHz -25 to +5 dB -25 to +5 dBm -87 to +3 dBm -87 to +3 dBm
10 to 20 GHz -24 to +3 dB -25 to +2 dBm -86 to +1 dBm -87 to 0 dBm
20 to 30 GHz -23 to 0 dBm -25 to -2 dBm -85 to -2 dBm -87 to -4 dBm
30 to 40 GHz -23 to -4 dBm -25 to - 6 dBm -85 to -6 dBm -87 to -8 dBm
40 to 45 GHz -25 to -5 dBm -27 to -7 dBm -87 to -9 dBm -87 to -11 dBm
45 to 50 GHz -25 to -10 dBm -27 to -12 dBm -87 to -15 dBm -87 to -17 dBm
Power sweep range (ALC)
45 MHz to 10 GHz 30 dB 30 dB 30 dB 30 dB ALC range starts at
10 to 20 GHz 27 dB 27 dB 27 dB 27 dB maximum leveled output
20 to 30 GHz 23 dB 23 dB 23 dB 23 dB power and goes down to
30 to 40 GHz 19 dB 19 dB 19 dB 19 dB power level indicated by
40 to 45 GHz 20 dB 20 dB 18 dB 16 dB dB amount specified.
45 to 50 GHz 15 dB 15 dB 12 dB 10 dB
Power resolution 0.01 dB 0.01 dB 0.01 dB 0.01 dB
Phase noise (10-kHz offset from center frequency, nominal power at test port)
45 MHz to 10 GHz -70 dBc typical
10 to 20 GHz -65 dBc typical
20 to 40 GHz -55 dBc typical
40 to 50 GHz -55 dBc typical
Harmonics (2nd or 3rd) -23 dBc typical, in power
Non-harmonic spurious (at nominal output power)
45 MHz to 20 GHz -50 dBc typical, for offset
frequency > 1 kHz
20 to 40 GHz -30 dBc typical, for offset
frequency > 1 kHz
40 to 50 GHz -30 dBc typical, for offset
frequency > 1 kHz
1. Source output performance on port 1 only.
Port 2 output performance is a characteristic.
2. ±1.5 dB for power ≤ -23 dBm.
3. Power to which the source can be set and phase
lock is assured.