Atec Agilent-E8364A - Manual (Page 13)

Extended configuration and extended power range and bias-tees (E8362A-Options UNL and 014)
Applies to E8362A PNA Series analyzer, 85052B (3.5 mm) calibration kit, 85131F flexible test port cable
set, and a full two-port calibration. (Specifications apply over environmental temperature of 23° ±3°C,
with less than 1°C deviation from calibration temperature.)
Description Specification (dB)
45 MHz to 500 MHz 500 MHz to 2 GHz 2 to 10 GHz 10 to 20 GHz
Directivity 48 48 44 44
Source match 40 40 31 31
Load match 48 48 44 44
Reflection tracking ±(0.003 + 0.2/°C) ±(0.003 + 0.2/°C) ±(0.006 + 0.2/°C) ±(0.006 + 0.2/°C)
Transmission tracking ±(0.017 + 0.2/°C) ±(0.017 + 0.2/°C) ±(0.065 + 0.2/°C) ±(0.091+ 0.2/°C)
Crosstalk (reflection port to < -85 < -100 < -110 < -100
transmission port: short
circuits at both ports;
isolation calibration
applied)
Transmission uncertainty (specifications)
Reflection uncertainty (specifications)
Magnitude
0.01
0.1
1
10
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
Uncertainty (dB)
E8362A 014 & UNL full 2-port cal using 85052B
S11 = S22 = 0
Source power = -17 dBm
■ 45 MHz to 500 MHz
◆ 500 MHz to 2 GHz
▲ 2 GHz to 10 GHz
● 10 GHz to 20 GHz
Phase
0.1
1
10
100
-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10
Transmission coefficient (dB)
Uncertainty (degrees)
E8362A 014 & UNL full 2-port cal using 85052B
S11 = S22 = 0
Source power = -17 dBm
■ 45 MHz to 500 MHz
◆ 500 MHz to 2 GHz
▲ 2 GHz to 10 GHz
● 10 GHz to 20 GHz
Magnitude
0
0.01
0.02
0.03
0.04
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
Uncertainty (linear)
E8362A 014 & UNL with 85052B
S21 = S12 = 0
Source power = -17 dBm
■ 45 MHz to 500 MHz
◆ 500 MHz to 2 GHz
▲ 2 GHz to 10 GHz
● 10 GHz to 20 GHz
Phase
0
2
4
6
8
10
0 0.2 0.4 0.6 0.8 1
Reflection coefficient (linear)
Uncertainty (deg)
E8362A 014 & UNL with 85052B
S21 = S12 = 0
Source power = -17 dBm
■ 45 MHz to 500 MHz
◆ 500 MHz to 2 GHz
▲ 2 GHz to 10 GHz
● 10 GHz to 20 GHz
13