Franklin Fueling Systems T5 Series Fuel Management System Operators Guide - Manual (Page 15)

11
Printing Reports
Internal Printer
An internal printer is optional on TS-550/5000 FMS consoles, but not available on the TS-5 (TS-608) console. It is an
impact style printer that uses standard printer paper and has a replaceable ribbon cartridge. For paper loading and ribbon
replacement instructions, refer to the Routine Maintenance chapter in this manual.
External Printers
External printing is accomplished via USB. No software drivers need to be installed to print via USB. Connect the USB
cable to the printer and the USB port on the console. The unit is now ready to print. For a list of approved printers, refer to
Appendix A.
Note: The setup will need to be changed so the printer option is 0, save the configuration, connect the printer and cycle
the power of the tank gauge.
Print Button
Pressing the print button from the Home screen will bring up a list of some of the Applications that are
running on the system. Select the Application that you want to print from and a list of available reports for
that Application will be displayed. If you are already inside of an Application, then its report options will be
displayed immediately. There are some screens, like the Inventory Summary, where selecting the print
button will not provide additional options, like date range.
Reports Options
The following reports are available for the different optional Applications. Each report allows you to select the date range
of data you wish that report to contain.
System Reports
Report Description
Alarm History A history of the Alarms that have occurred.
Application Event History A history of the Application Events that have occurred.
Setup
A printout of the system programming.
FMS Reports
Report Description
Inventory Complete level, volume, temperature and ullage info for each tank.
Delivery Start and ending level and volume information and total amount delivered.
Tank Test Annual and monthly static tank testing results. (tank testing option required)
SCALD 24hr continuous monthly tank testing results. (tank testing option required)
Lines Gross, monthly and annual line tests. (line leak option required)
Regulatory Complete compliance report for all tanks, lines, sensors.
Sensor
Alarm status of all monitoring sensors.