Pump Solutions Group PZiG Series - Manual (Page 38)

37
Specifications
¡4-pin connector
■I/O Signal Specifications
Category Standard
Input
Max. response speed 125 Hz (duty 50%)
Input resistance: approx. 2 k Ω
Max. response speed 10 Hz (duty 50%)
Input resistance: approx. 2 k Ω non-lock operation
Damping 1 sec or less
Input resistance: approx. 110 Ω
Name Type Connection Pin No.
Digital signal input
[pulse signal input]
No-voltage contact
O.C
1-4
(IN1, high speed)
Analog signal
DC
4 ~ 20mA
2-4
Digital signal input 2
[stop signal input]
No-voltage contact
O.C
3-4
(IN2, low speed)
Note1 The input control function can be changed in the program. The function between [] is initial at the factory shipment.
Note2 Pin No.4 is common (- side).
Note1 The input control function can be changed in the program. The function between [] is initial at the factory shipment.
Note2 Connect pin No.3 to the input side and power supply common (- side), and to pin No.4 on the 4-pin side.
Note3 Pin No.6 is the output-side common (emitter side).
Category Category Standard
Input
Max. response speed 125 Hz (duty 50%)
Input resistance: approx. 2 k Ω
+5 V/10 mA or less
Name Type Connection
Digital signal input
[pulse signal input]
No-voltage contact
O.C
1-3
(IN3, high speed)
Sensor power
supply
Stabilized power
supply
2-3
Digital signal
[start reset]
No-voltage contact
O.C
7-3
(IN4, low speed)
Max. response speed 10 Hz (duty 50%)
Input resistance: approx. 2 k Ω
Output
Digital signal
[all alarms]
O.C
4-6
(OUT1)
25 VDC/10 mA or less
Digital signal
[operation pulse]
O.C
7-3
(OUT2)
25 VDC/10 mA or less
Power
supply
¡8-pin connector
Data
83 or less Noise (dBA)
■Other Specifications
Specification
05-45_PZiG Series(2)English 06.8.4 9:39 AM y [ W 37