Pump Solutions Group PZiG Series - Manual (Page 37)

36
Specifications
Operating tem-
perature range
Transferrable viscosity (mPa·s)
Self-priming height (m)
Weight (kg)
300
Stroke length adjustment range (%)
Discharge volume per stroke (mL/stroke)
Max. number of strokes (spm)
700 1000 1300
5.39 12.0 15.8 20.6
1.1 2.5 3.3 4.3
145 29
300
20 to 100% adjustable
FNPT3/4 / MNPT3/4 / VP20 union joint
0 to 40˚C
0 to 40˚C
50 or less (high viscosity: 1000 or less)
-1.5
Approx. 11
500
8.40
1.8
58 43.5
Munsell (approximately)5PB 6/2.5
Stroke length (mm) 1.5
Model
Specifications
All models
Power supply
voltage (Vac)
Frequency (Hz)
Max. current consumption (VA)
Average current consumption (W)
Number of phases (f)
100 ~ 240
90 ~ 264
50/60
1
750
100
Max. current (A) 4
Rating
Operating range
■Performance Specifications
■Power Supply Specifications
Model
Specifications
101
＊In the case of the FTCT using PTFE tube, this becomes 0.5 (MPa).
• Use the maximum current when calculating the required power supply capacity.
• Be sure to use a commercial power supply (power supplied from an electric power company) as the power supply.
Power supplies that cannot be used:
1. Power supply equipped with an AC power regulator
2. Power supply on the output side of the inverter
Ambient temperature
Transferrable temperature
Max. discharge
volume
20.4 31.8 45.6 60.0 78.0
340 530 760 1000 1300
Max. discharge
pressure
1.0 ＊ 0.7 ＊ 0.4 0.3 0.2
10 7 4 3 2
Connection size
PVC braided hose 12 x 18 mm dia. / FNPT 1/2
PTFE tube 12 x 15 mm dia. / FNPT 1/2
Pump color
Munsell (approximately)10YR 7.5/14
L/H
mL/min
G/H (US)
MPa
bar
psi
For less than 50mPa•s (VTCE/VTCF)
For less than 50mPa•s (FTCT)
For high-viscosity (VTCF)
Pump case (front)
Pump case (rear)
05-45_PZiG Series(2)English 06.8.4 9:39 AM y [ W 36