Pump Solutions Group Neptune Series 500 Specs Industrial - Manual

Neptune Chemical Pump Co.
P.O. Box 247
Lansdale, PA 19446 Phone: 215-699-8700
Fax: 215-699-0370
800 Fax: 800-255-4017
www.neptune1.com
NEPTUNE/CHEMICAL FEED SYSTEM SPEC 10-18-00 jvb ZL107972
1
Chemical Feed System & Metering Pump Specifications for
General Use
Introduction:
This guide specification is presented to assist the writer in specifying chemical
metering pumps or complete packaged chemical feed systems. This specification
contains provisions for options and alternates. Bold face type indicates areas where
a selection or choice must be made. The specification writer must conform this
specification to meet the requirements of the particular application. It i s
recommended that each chemical application be defined by one or more data sheets
to describe additional details of the service.
Use of this Spec:
Determine the chemical, flow rates, and pressures required for the installation.
Determine the actual scope to be furnished, i.e., metering pumps only or complete
chemical feed systems.
Select the paragraphs from the attached pages to define the items and accessories
which will comprise the system.
Select the appropriate language for each bold face section, deleting the unwanted
portion.
Request bulletin AB-2000 Sizing and Selecting Metering Pumps/Planning a
Metering Pump Installation for further information on pump selection and system
design.