Extron Electronics VSC 300_300D User Guide - Manual (Page 51)

B-7 VSC 200/200D/300/300D Reference Information
Continued on the next page
BNC cables
Extron SHR BNC cables are super high resolution BNC cables. Extron recommends
that when using signals with a scanning frequency of 15–125 kHz and running
distances of 100 feet or more, high resolution BNC cables should be used to achieve
maximum performance.
Bulk cable
Extron Part Part #
SHR bulk cable
Bulk SHR-1, 500’
22-098-02
Bulk SHR-1, 1000’ 22-098-03
Bulk SHR-4, 500’ 22-099-02
Bulk SHR-5, 500’ 22-100-02
BNC SHR crimp connectors, qty. 50 100-075-51
BNC-4 mini-HR bulk cable
Bulk BNC 4-500’ HR
22-032-02
Bulk BNC 4-1000’ HR 22-032-03
BNC 5 mini-HR bulk cable
Bulk BNC 5-500’ HR
22-020-02
Bulk BNC 5-1000’ HR 22-020-03
BNC 5 plenum mini-HR bulk cable
Bulk BNC 5-500’ HRP
22-103-02
Bulk BNC 5-1000’ HRP 22-103-03
Install plenum bulk cable
Bulk Install Plenum, 500’
22-111-03
Bulk Install Plenum, 1000’ 22-111-04
Assorted connectors
Extron Part Part #
BNC connectors
BNC mini-HR crimp connectors, qty. 50
100-074-51
BNC SHR crimp connectors, qty. 50 100-075-51
BNC bulkhead connectors, qty. 50 100-076-51
(for custom wall plates)
Pre-cut cables
BNC-4 HR cable is used for RGBS cable runs and BNC-5 is used for RGBHV cable
runs. Either type can also be used for composite video, S-video, or RGB with sync
on green. All Extron BNC cables have male gender connectors at both ends. A
plenum version of the BNC-5 HR cable is also available.
Extron Part Part #
BNC-4 HR cable
BNC-4-25’HR (25 feet/7.5 meters)
26-210-04
BNC-4-50’HR (50 feet/15.0 meters) 26-210-05
BNC-4-75’HR (75 feet/23.0 meters) 26-210-06
BNC-4-100’HR (100 feet/30.0 meters) 26-210-07
BNC-4-150’HR (150 feet/45.0 meters) 26-210-08
BNC-4-200’HR (200 feet/60.0 meters) 26-210-09
BNC-4-250’HR (250 feet/75.0 meters) 26-210-54
BNC-4-300’HR (300 feet/90.0 meters) 26-210-53