beautypg.com

Specifications, cont’d – Extron Electronics VSC 300_300D User Guide User Manual

Page 44

background image

Specifications, cont’d

VSC 200/200D/300/300D Specifications

A-4

Video output

Number/signal type ................... 1 RGBHV/RGBS/RGsB or component video, or

1 RGB scaled VGA, or
1 digital component video (CCIR 601/ITU-R BT.601) (VSC 300D only), or
1 S-video, or
1 NTSC/PAL composite video

Connectors .................................... 5 BNC female .......................... RGBHV/RGBS/RGsB (including scaled VGA)

or component video

1 BNC female .......................... digital component video — VSC 300D only
1 4-pin mini-DIN female ....... S-video
1 BNC female .......................... composite video

Minimum/maximum levels ...... 0.0V to 1.0V p-p
Impedance .................................... 75 ohms
Scaled VGA resolution ............... 640x480, 800x600, 832x624, 852x480, 1024x768 and 720p

Sync

Input type ..................................... Autodetect RGBHV, RGBS and RGsB
Output type .................................. Autodetect RGBHV, RGBS, RGsB (RGB formats are toggle switch-

selectable)

Genlock connectors ..................... 1 BNC female ........... genlock input

1 BNC female ........... genlock output (terminate w/75 ohms if unused)

Standards ...................................... NTSC and PAL
Input level ..................................... 1.5V to 5V p-p
Input impedance .......................... 75 ohms
Output impedance ...................... 75 ohms
Polarity .......................................... Negative

Control/remote — scan converter

Serial control port ........................ RS-232, 9-pin female D connector
Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations .... 2 = TX, 3 = RX, 5 = GND
Program control ........................... Extron’s control program for Windows®

Extron’s Simple Instruction Set™ – SIS™

General

Power ............................................. 100VAC to 240VAC, 50/60 Hz, 30 watts, internal
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing

Rack mount ................................... Yes
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.75" H x 17.5" W x 9.4" D (1U high, full rack width)

4.4 cm H x 44.4 cm W x 23.9 cm D

Product weight ............................. 5.7 lbs (2.6 lbs)
Shipping weight ........................... 11 lbs (5.0 kg)
Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A
MTBF ............................................. 30,000 hours (demonstrated)
Warranty ....................................... 3 years parts and labor

Specifications are subject to change without notice.

This manual is related to the following products: