Extron Electronics VSC 300_300D User Guide - Manual (Page 50)

Reference Information, cont’d
VSC 200/200D/300/300D Reference Information B-6
5. Reinstall the cover of the scan converter.
6. If rack mount brackets were removed earlier, reinstall them.
7. Attach the power cord to the scan converter and to the AC power source.
Make sure the scan converter is working correctly.
8. If the scan converter is rack mounted, remove the power cable from the scan
converter, and reattach the rack mount brackets. Reattach the scan converter
to the rack, and reconnect the power cord and input and output cables.
Part Numbers
VSC 200/200D part numbers
Extron Part Part #
VSC 200 60-274-02
VSC 200D 60-274-01
VSC 200/300 D-1 Module 70-065-01
VSC and DDS Control Program 29-038-01
VSC 200/200D/300/300D 68-396-01
User’s Manual
Related part numbers
Extron Part Part #
*BNC 75 ohm termination plug 26-300-01
*Mac/VGA cable, 6 feet 26-462-01
*S-video cable, 6 feet 26-316-02
RCA (female) BNC (male) adapter 10-264-01
SVHS - BNC adapter 26-353-01
GLI 250 (ground loop isolator, 60-123-01
250 MHz RGBHV)
* These items are supplied with the VSC 200/200D.
VSC 300/300D part numbers
Extron Part Part #
VSC 300 60-275-02
VSC 300D 60-275-01
VSC 200/300 D-1 Module 70-065-01
VSC and DDS Control Program 29-038-01
VSC 200/200D/300/300D 68-396-01
User’s Manual
Related part numbers
Extron Part Part #
*BNC 75 ohm termination plug 26-300-01
*Mac/VGA cable, 6 feet 26-462-01
*Mac/13W3 cable, 6 feet 26-465-01
*VGA/13W3 cable, 1 foot 26-466-01
*S-video cable, 6 feet 26-316-02
SY-VGA cable, 6 feet 26-397-01
RCA (female) BNC (male) adapter 10-264-01
SVHS - BNC adapter 26-353-01
GLI 250 (ground loop isolator, 60-123-01
250 MHz RGBHV)
* These items are supplied with the VSC 300/300D.