Extron Electronics MPS 601 User Guide - Manual (Page 38)

MPS 601 • Software Configuration and Control 32
3. Click Browse (see figure 24 on the previous page).
4. Navigate to the desired firmware file and select the device-specific firmware file. Valid
firmware files have an .eff or .esf file extension.
5. Click Open . This returns you to the Update Firmware dialog box.
6. In the Update Firmware dialog box, click Update . A progress bar shows the progress of
the firmware upload to the device.
Navigating the PCS Application
The configuration software opens to two main tabs: Configuration and Hardware .
Figure 25. Product Configuration Software - Main Screen
Click a tab to change the global navigation bar with icons that open various pages for
configuration settings and information (see figures 26 and 27 below for available pages on
the configuration and the hardware tabs).
Figure 26. Configuration Global Navigation Bar
Figure 27. Hardware Global Navigation Bar
Each page is divided into the AV Controls panel (which is always present), and a panel with
details of the selected configuration page.