Extron Electronics MGP 462D - Manual (Page 101)

5-17 MGP 462 • Ethernet Configuration and Control
Horizontal Size — Stretch or shrink the selected window horizontally. The range
is determined by the output rate.
Vertical Shift — Move the selected window up or down on the screen. The value
in the text box is the distance in lines of the window’s top edge from the top
edge of the display. The range is determined by the output rate; the default is
2048 plus or minus the output rate.
Vertical Size — Stretch or shrink the selected window vertically. The value in the
text box is the window’s height in lines. The range depends on the output
rate.
Detail — Adjust the sharpness of the image in the selected window. The range is
000 to 127; the default is 064.
Zoom — Increase the size of the image while keeping the aspect ratio constant. The
zoom value is the same as the window size.
Auto Image — Perform an automatic image adjustment to the selected window.
Auto Image measures where the active area starts and stops, and adjusts
input sampling accordingly.
Picture Controls – Image
This section contains + and – buttons, which you can click to increase or decrease
parameter values for the image within the window that you selected at the top of
the User Control screen. If a field is provided, you can also enter the value in it.
You can make the following adjustments:
Horizontal Shift — Move the image to the right or left in the selected window. The
value in the text box is the distance in pixels of the image’s left edge from the
left edge of the window. The range is dependent on the output rate; the
default is 2048 plus or minus the output rate.
Horizontal Size — Stretch or shrink the image horizontally. The value in the text
box is the image’s width in pixels. The range is dependent on the output rate.
Horizontal Start Location — Specify the distance in pixels from the left edge of the
selected input’s total video display area to the left edge of its active area. The
default is 128.
Vertical Shift — Move the selected image up or down in the selected window. The
value in the text box is the distance in lines of the image’s top edge from the
top edge of the window. The range is dependent on the output; the default is
2048 plus or minus the output rate.
Vertical Size — Stretch or shrink the selected image vertically. The value in the
text box is the image’s height in lines. The range is dependent on the output
rate.
Vertical Start Location — Specify the distance in lines from the top edge of the
selected input’s total video display area to the top edge of its active area. The
default is 128.
Zoom — Increase or decrease the size of the image in the selected window while
keeping the aspect ratio constant. The range is dependent on the output rate.
Brightness — Increase or decrease the intensity of video light in the selected
window. The range is 000 to 127; the default is 064.