Step thirteen: upload the global configurator file, Step fourteen: change device settings (if desired), Software setup, cont’d – Extron Electronics IPL T PC1i Setup Guide User Manual
Page 24

IPL T PC1 Interface • Software Setup
Software Setup, cont’d
3-24
IPL T PC1 Interface • Software Setup
3-25
Step Thirteen: Upload the Global Configurator file.
When the build process completes, the Upload dialog box opens.
1
.
Click the Begin button.
When the upload process completes, the Progress and
Status fields are updated to indicate completion.
2
.
Click the Test GV System button to view the GlobalViewer
host interface.
3
.
Click Close to close the Upload Manager window.
Step Fourteen: Change device settings (if desired).
If for any reason you need to change any of the previously
configured settings,
1
.
From the Tools menu, select Change Device Settings.
2
.
On the Device Settings window, select a device.
3
.
Click Settings to open the Settings pull-down menu.
4
.
Select and change the desired setting(s), for example:
Set Mail Server...
, Set Gateway..., Set Subnet Mask..., etc.
N
Use the Set Mail Server... option on the Settings menu
to identify the local mail server's IP address, domain, and
passwords.