Extron Electronics FOX 3G DVC User Guide - Manual (Page 8)

FOX 3G DVC • Introduction 2
Features
The FOX 3G DVC provides the following features:
• Input — Fiber optic LC connector with buffered loop-through for fiber optic multi-rate
SDI
• Outputs — DVI-D and 15-pin HD connectors for digital and analog RGB or component
video; captive screw connector for balanced and unbalanced stereo audio
• Fiber optic multi-rate SDI signals up to 2.97 Gbps — Accepts data rates from
standard definition NTSC and PAL to HDTV 1080p/60. It complies with SMPTE 259M,
292M, 424M, and ITU digital video standards.
• Compatibility with other Extron FOX products — Compatible with the
FOX 3G HD-SDI Fiber Optic Extender and FOX series distribution amplifiers, switchers,
and matrix switchers
• Simultaneous DVI-D and analog RGB or component video outputs — Provides
high resolution digital and analog video outputs that allow for easy integration of
multi-rate SDI signals into DVI or RGB-based AV devices and systems.
• Daisy-chain capability — A fiber optic input loop-through allows up to three
FOX 3G DVC and FOX 3G HD-SDI units to be daisy-chained so that displays in multiple
locations can be served from a single transmitter.
• AES3 audio de-embedding — Extracts and outputs embedded AES3 stereo audio
streams.
• Balanced or unbalanced audio output
• Audio attenuation control
• Analog RGB or component video output — Outputs analog RGB as RGBHV, RGBS,
or RGsB. Outputs component video as R-Y, B-Y, Y.
• Bi-level or tri-level sync is available for component video output.
• Internal test patterns for calibration and setup — Nine test patterns are available,
including a crop pattern, color bars, and grayscale.
• Muting control — Provides video and audio output muting.
• RS-232 configuration and control — An RS-232 serial port provides configuration and
control via the Extron Simple Instruction Set (SIS™) commands.
• USB configuration and control — A USB Config port provides configuration and
control via SIS commands.
• Front panel security lockout — Locks out all front panel functions except for input
selection (all functions remain available through RS-232 control).
• Rack and furniture mountable 1U, half rack width metal enclosure
• Internal universal power supply — The 100-240 VAC, 50-60 Hz, international power
supply provides worldwide power compatibility.