Extron Electronics FOX 3G DVC User Guide - Manual (Page 35)

FOX 3G DVC • Reference Information 29
Audio output
Number/signal type ........................ 1 stereo, balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance ..................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Maximum level (Hi-Z) ...................... >+21 dBu, balanced or +15 dBu unbalanced at 0.05% THD+N
Control/remote
Serial control port ........................... 1 RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles)
Baud rate and protocol ................... 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configuration ....... 3 = Tx, 4 = Rx, 5 = GND
USB control port ............................. 1 front panel female mini USB type B
USB standard ................................. USB 2.0, low speed
Program control ............................. Extron Simple Instruction Set (SIS)
General
Power supply .................................. Internal
Input: 100 VAC to 240 VAC, 50-60Hz
Power consumption ....................... 12 watts
Temperature/humidity .................... Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling .......................................... Convection, sides to top
Thermal dissipation ........................ 24 BTU/hr
Mounting
Rack mount ............................. Yes, with optional 1U rack shelf
Furniture mount ...................... Yes, with optional through-desk mounting kit or under-desk mounting kit
Enclosure type ................................ Metal
Enclosure dimensions ..................... 1.75" H x 8.75" W x 9.5" D (half rack wide)
4.4 cm H x 22.2 cm W x 24.1 cm D
(Depth excludes connectors and knobs.)
Product weight ............................... 2.3 lbs (1.1 kg)
Shipping weight ............................. 6 lbs (3 kg)
Vibration ........................................ ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety ...................................... CE, c-UL, FDA Class 1, UL
EMI/EMC ................................. CE, C-tick, FCC Class A, ICES, VCCI
MTBF ............................................. 30,000 hours
Warranty ........................................ 3 years parts and labor
NOTES: • All nominal levels are at ±10%.
• Specifications are subject to change without notice.