Extron Electronics FOX 3G DVC User Guide - Manual (Page 27)

FOX 3G DVC • Operation 21
12. Click Begin. The following indicators on the Firmware Loader window show the
progress of the update:
• The Transfer Time section shows the amount of remaining and elapsed time for the
update.
• The Total Progress section displays a status bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and the Status column displays
Uploading .
The LCD screen on the DVC front panel displays FW. UPLOAD PLEASE WAIT .
Figure 23. Firmware Upload in Progress
When the upload is complete, the Remaining Time field in the Transfer Time section
shows 00:00:00 , the Progress column shows 100% , and Completed is displayed above
the progress bar and in the Status column.
Figure 24. Firmware Upload Complete
The LCD screen briefly displays the Extron S 3 logo, then returns to the default cycle.
13. When the firmware upload and unit reset are complete, close the Firmware Loader
window.