Extron Electronics FOX Matrix 7200 - Manual (Page 75)

Command and Response Table for IP- and SNMP-Specific SIS Commands
Symbol definitions
X4) = Matrix name (Up to 24 alphanumeric characters)
NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 70).
X4! = Default name Matrix 3200 — FOX-4G-Matrix-3- + last 3 pairs of MAC address
Matrix 7200 — FOX-4G-Matrix-7- + last 3 pairs of MAC address
X4@ = Time and date (for set) In the format: MM/DD/YY•HH:MM:SS where:
MM = month: 01 (January) through 12 (December)
DD = day: 01 through 31
YY = year: 00 through 99
HH = hour: 00 through 23
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X4# = Time and date (for read) In the format: Day,•DD•Mmm•YYYY•HH:MM:SS where:
Day = weekday: Mon through Sun
DD = date: 01 through 31
Mmm = month: Jan through Dec
YYYY = year: 2000 through 2099
HH = hour: 00 through 24
MM = minutes: 00 through 59
SS = seconds: 00 through 59
X4$ = GMT offset –12.0 through +14.0. Hours and minutes removed from GMT
X4% = Daylight Saving Time 0 = Daylight Saving Time off or ignore 2 = Daylight Saving Time on (Europe)
1 = Daylight Saving Time on (North America) 3 = Daylight Saving Time on (Brazil)
X4^ = IP address ###.###.###.###
X4& = Hardware (MAC) address ##‑##‑##‑##‑##‑##
X4* = Number of open connections 0 – 255
X4( = Password 12 alphanumeric characters
NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 70).
X5) = Domain name Standard domain name rules apply (for example: xxx.com)
NOTE: The HTML language reserves certain characters for specific functions (see Special Characters on page 70). The @ character is
acceptable only as the lead‑in to the domain name (such as @extron.com).
X5! = E‑mail account 1 through 5 65 – 69. 65 = e‑mail recipient 1, 66 = 2, 67 = 3, ... 69 = recipient 5
X5@ = E‑mail address Typical e‑mail address format (for example: nnnn@xxx.com)
X5# = Notification selections, part 1 I = inputs F = fans P = power supply
X5$ = Notification selections, part 2 If X5# = I, then X5$ = 00 (all inputs), or 01 through 32 (72) (input 1 through 32 [72])
If X5# = F, then X5$ = 00 (all fans)
If X5# = P, then X5$ = 00 (both power supplies).
X5% = Notify when? 0 = no response 1 = fail/missing 2 = fixed/restored
3 = both 1 & 2 4 = suspend
X5^ = DHCP and SNMP 0 = off or disable, 1 = on or enable
X5& = Port # 00 (all ports), 01 (rear panel), 02 (front panel), 03 – 99
X5* = Baud rate 9600, 19200, 38400, 115200
X5( = Parity odd, even, none, mark, space (Only the first letter required.)
X6) = Data bits 7, 8
X6! = Stop bits 1, 2
X6@ = Port type 0 = RS‑232 1 = RS‑422
X6# = Verbose mode 0 = clear/none (default for Telnet connection) 2 = tagged responses for queries
1 = verbose mode (default for RS‑232/RS‑422 3 = verbose mode and tagged for queries
NOTE: If tagged responses are enabled, all read commands return the constant string and the value as the set command does (for
example, the read matrix name command, E CN } returns Ipn• X4)] ).
FOX Matrix 3200 and 7200 Switchers • Programming Guide 67