beautypg.com

Reset operations – Extron Electronics FOX Matrix 7200 User Manual

Page 51

background image

4.

Exit the Serial Port Selection and Configuration mode: Press and release an
output button.

C O N T R O L

PRESET

ENTER

ESC

VIEW

5

31 32

0

All Control buttons and the Output 31 (71) and Output 32 (72)
buttons return to unlit or background illumination.

Press and release

an output button.

Reset Operations

The rear panel has a Reset button that initiates four levels of resets (numbered 1, 3, 4, and 5
for the sake of comparison with an Extron IPL product). The Reset button is recessed, so
use a small screwdriver, a pointed stylus, or a ballpoint pen.
For different reset levels, press and hold the button while the switcher is running or press
and hold the button while you apply power to the switcher.
See the

table

on the next page for a summary of the modes.

ATTENTION: Review the reset modes carefully. Using the wrong reset mode may

result in unintended loss of flash memory programming, port reassignment, or a
controller reboot.

NOTE: The reset modes listed on the next page close all open IP and Telnet

connections and close all sockets. Also, the following modes are separate functions,
not a continuation from Mode 1 to Mode 5.

FOX Matrix 3200 and 7200 Switchers • Operation

43

This manual is related to the following products: