Changing a configuration – Extron Electronics FOX Matrix 7200 User Manual
Page 36
The current configuration (see figure 19) is now input 5 tied to output 3, output 4, and
output 8.
Input 5 tied
to outputs 3, 4, and 8
Input
Output
3
4
8
5
Figure 19.
Final Configuration, Example 1
Example 2: Add a tie to a set of ties
In the following example, a new tie is added to the current configuration. The example
shows the front panel indications that result from your actions.
NOTE: This example assumes that you have performed
on the previous
page.
1.
Clear all selections: Press and release the Esc button.
2.
Select an input: Press and release the Input 5 button.
1
2
3
4
5
6
7
8 15 16
17 18 19 20 21 22 23 24 31 32
1
2
3
4
5
6
7
8 15 16
17 18 19 20 21 22 23 24 31 32
INPUTS
OUTPUTS
Press and release the Input 5 button.
The button lights.
The Output 3, Output 4, and Output 8 buttons light
to indicate the ties created in example 1.
3.
Select the output: Press and release the Output 1 button.
C O N T R O L
PRESET
ENTER
ESC
VIEW
1
2
3
4
5
6
7
8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
The Enter button blinks
to indicate the need to
confirm the change.
Press and release the Output 1 button.
The button blinks to indicate that the
selected input will be tied to this output.
FOX Matrix 3200 and 7200 Switchers • Operation
28