Extron Electronics FOX Matrix 7200 - Manual (Page 30)

Control Buttons
NOTE: See Front Panel Operations on page 25 for detailed descriptions of the
following operations.
Primary functions
Action Save changes Select Preset mode Select View mode Cancel/Escape
Indication Blink: Save needed Blink: Save preset
Lit: Recall preset
View mode selected Flashes once
ENTER PRESET VIEW ESC
Secondary functions
I/O grouping Action/
indication Select and indicate
group 1
Select and indicate
group 2
Select and indicate
group 3
Select and indicate
group 4
Port
configuration Action 1 Select Configuration mode.
Action 2 Select 9600 baud Select 19200 baud Select 38400 baud Select 115200 baud
Indication Blink: 9600 baud Blink: 19200 baud Blink: 38400 baud Blink: 115200 baud
Front panel
lock Action With Esc, toggle front
panel lock on and off. With Enter, toggle
front panel lock on
and off.
Action Flash twice to indicated the front panel has
been locked or unlocked.
c
Enter button — The Enter button has two primary functions (❏) and three secondary
functions (•):
❏
Saves configuration or preset changes that you make on the front panel. To create
a simple configuration:

Press the desired input button ( item a ).

Press the desired output button or buttons ( item b ).

Press the Enter button.
❏ Indicates that a potential tie has been created but not saved.
• In the I/O Group mode, selects group 1 and indicates the selection.
• With the Preset, View, and Esc buttons, selects Serial Port Selection and
Configuration mode.
• With the Esc button, toggles the front panel lock on and off.
d
Preset button — The Preset button has two primary functions (❏) and three secondary
functions (•):
❏
Activates Save Preset mode to save a configuration as a preset and Recall Preset
mode to activate a previously‑defined preset.
❏ Blinks when Save Preset mode is active and lights steadily when Recall Preset
mode is active.
• In the I/O Group mode, selects group 2 and indicates the selection.
• With the Enter, View, and Esc buttons, selects Serial Port Selection and
Configuration mode.
• Selects 19200 baud for the rear panel Remote port in Serial Port Selection and
Configuration mode and indicates the selection.
FOX Matrix 3200 and 7200 Switchers • Operation 22