Extron Electronics FOX Matrix 7200 User Manual
Page 73
Command and Response Table for SIS Commands (continued)
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Information requests
Information request
I
V
X1%
X
X1^
•A
X1%
X
X1^
•S
X1&
1
X1&
2
...
X1&
n
]
V
X1%
X
X1^
shows the number of available inputs
and outputs for this configuration.
A
X1%
X
X1^
has no meaning for this product.
S
X1&
1
X1&
2
...
X1&
n
shows the board type installed
in each slot.
n is either 4 or 9, depending on the model.
Slot/plane/LC information
0*
X1*
I
X1(
1
X1(
2
X1(
3
X1(
4
X1(
5
X1(
6
X1(
7
X1(
8
]
Request part number
N
68-nnnn-nn
]
See
www.extron.com
, for part numbers.
Request part number and
board configuration
*N
68-nnnn-nn.
X1&
1
X1&
2
X1&
3
...
X1&
n
]
Part number (see below) plus I/O boards installed.
n is either 4 or 9, depending on the model.
Read reclocker status
X$
=
X%]
Show current rate status for reclocker
X$
.
NOTE: The switcher automatically detects and reclocks the signal if the rate is 4.25 Gbps only. Other rates are ignored.
View SFP module status
40*
X2)
S
X2!
•
X2@
•
X2#
•
X2$]
NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the
overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware
update, which is available at
www.extron.com
.
Query firmware version
Q
X2%]
Example:
Q
1.23
]
The factory‑installed controller firmware version
is 1.23 (sample value only).
Query controller firmware
version (verbose)
0Q
X2%
-
X2^
-
X2^]
Provide a detailed status of the Ethernet protocol
firmware, the controller firmware, and any
firmware upgrade. The firmware that is
running is marked by an asterisk (*). A caret
(^) indicates that the firmware has a bad
checksum or an invalid load. ?.?? indicates
that firmware is not loaded.
Response description:
Ethernet protocol firmware version‑controller firmware version‑updated firmware version
]
Example:
0q
Ethernet
protocol
firmware
Description
Fiber Matrix firmware version
Updated firmware version
* indicates the version running
Upload date and time
1.23-1.00(1.68-FOMX Series -Wed, 20 Feb 2008 00:00:00 GMT)-1.00*(1.06-FOMX Series -Mon, 17 Mar 2007 16:39:21 GMT)
NOTE:
X1%
= Number (quantity) of inputs
8, 16, 24, 32, 40, 48, 56, 64, or 72
X1^
= Number (quantity) of outputs
8, 16, 24, 32, 40, 48, 56, 64, or 72
X1&
= Board installed
0 = No board installed
4 = Non‑pathological multimode board
1 = Non‑reclocking multimode board
5 = Non‑pathological singlemode board
2 = Non‑reclocking singlemode board
6 = Pathological singlemode board
3 = 3G, SDI, HD‑SDI board
X = Unknown board or mix of transceivers
X1*
= I/O board slot number
1 – 9 (FOX Matrix 7200) or 1 – 4 ( FOX Matrix 3200)
X1(
= Transceiver module installed
0 = No module installed
1 = Non‑pathological multimode module
3 = 3G‑SDI, HD‑SDI, SD‑SDI module
2 = Non‑pathological singlemode module
4 = Pathological singlemode module
X2)
= Transceiver module number
01 – 72 (or maximum number of transceiver modules for your configuration)
X2!
= Vendor/manufacturer name
X2@
= Transmit output power in milliwatts
X2#
= Receive optical power in milliwatts
X2$
= SFP temperature
Degrees Celsius
X2%
= Firmware version number to second decimal place (x.xx)
X2^
= Verbose firmware version‑description‑upload date/time. See above.
X%
= Output reclocking rate
00 = Bypass mode
01 = Automatic mode (HDSDI boards only)
03 = 2.125 Gbps (laser boards only)
02 = 1.250 Gbps (laser boards only)
04 = 4.250 Gbps (laser boards only)
X$
= SFP or reclockable output number
00 – 32 or 72 (00 = global [SFP only])
FOX Matrix 3200 and 7200 Switchers • Programming Guide
65