Extron Electronics FOX Matrix 7200 - Manual (Page 102)

Opening the Embedded Web Pages
Access the switcher using HTML pages as follows:
1. Start the web browser program.
2. Click in the Address field of the browser.
3. Enter the Matrix IP address in the Address field of the browser.
NOTE: If the local system administrators have not changed the value, the factory‑
specified default, 192.168.254.254, is the correct value for this field.
4. If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (
/ ) and the file name to open.
NOTES:
• The Address field of the browser should display the address in the following
format: < xxx.xxx.xxx.xxx >/< optional_file_name >.html.
• The HTML language reserves certain characters for specific functions (see
Special Characters on page 70).
5. Press the keyboard key. The switcher checks to see if it is password protected.
If the switcher is not password protected, it checks and downloads the HTML pages
(proceed to step 7).
If the switcher is password protected, the switcher downloads the Windows Security
dialog box (see figure 52).
Figure 52. Windows Security Dialog Box
NOTE: A User name entry is not required.
6. Click in the Password field and type in the appropriate administrator or user password.
Click the OK button.
FOX Matrix 3200 and 7200 Switchers • HTML Operation 94