Xylem H-3531 FlashLite - Manual (Page 33)

H-3531
Simple RS-232 Menu Interface 4-9
4.5.1 0-5v Output Options
4.5.1.1 Slope
This is the current slope that the H-3531 FlashLite™ has calculated based on the
max and min stage values.
4.5.1.2 V - 0-5v Output
This option is the enable for the 0-5v analog output. Once the 0-5v output is
enabled the H-3531 FlashLite™ will update the 0-5v output based on stage
following a new measurement. After pressing the V key the screen will refresh
with the option changed.
4.5.1.3 H - Max Stage
This option is the max stage value that the 0-5v output will be scaled up to. After
pressing the H key the user will see the following message.
Enter 0-5v Max Stage[ ]
Then the user can enter in the 0-5v max stage value and press the ENTER key to
submit the value. If the user does not want to edit the 0-5v max stage value then
press the ESC key to abort. Refer to section 5.14 in SDI-12 commands for more
details about editing this value.
4.5.1.4 L - Min Stage
This option is the min stage value that the 0-5v output will be scaled down to.
After pressing the L key the user will see the following message.
Enter 0-5v Min Stage[ ]
Then the user can enter in the 0-5v min stage value and press the ENTER key to
submit the value. If the user does not want to edit the 0-5v min stage value then
press the ESC key to abort. Refer to section 5.14 in SDI-12 commands for more
details about editing this value.
4.5.2 4-20mA Output Options
4.5.2.1 Slope
This is the current slope that the H-3531 FlashLite™ has calculated based on the
max and min stage values.
4.5.2.2 M - Max Stage