Xylem H-3531 FlashLite - Manual (Page 15)

H-3531
Installation 2-3
Components of the H-350-Install kit:
• 6 feet of 1/8" copper tubing
• 1/8" Tubing to 1/8" Male NPT fitting
• 1/8" Tubing to 1/4" NPT female fitting
• 1/8" Street "T"
• 1/8" NPT Male Pressure-relief valve (Rated for the pressure range of your
H-3531 FlashLite™)
3. Connect the main interface cable to your battery and/or data logger using the
appropriate pins shown in the table on the following page. If you are using the
SDI-12 interface, also connect the SDI-12 data line to the appropriate terminal on
the data recorder(see Section 2.4.1 SDI-12 Interface).
4. Make the connection to your data recorder as explained in Section 2.4.
5. Now you are ready to field test your H-3531 FlashLite™.