Xylem MultiLab 4010-2 - Manual (Page 65)

MultiLab 4010-2 Settings
ba76142e01 05/2013 65
Setting the calibra-
tion interval
The calibration interval is set to 7 days in the factory.
You can change the interval (1 ... 999 days):
9.2 ORP measurement settings
Settings The settings are made in the menu for measuring settings of the ORP measure-
ment. To open the settings, display the required measured parameter in the
measured value display and press the key. After completing the set-
tings, switch to the measured value display with .
Default settings are printed in bold.
1. Open the menu for measurement settings with .
2. In the Calibration / Calibration interval menu, set the calibration interval
with <><>.
3. Confirm the setting with .
4. Quit the menu with .
Menu item Possible setting Explanation
mV resolution 0.1
1 Resolution of the mV display
Reset - Resets all sensor settings to the
delivery condition (see section
9.6.1 R
ESETTING THE MEASUREMENT
SETTINGS , page 73).