Xylem MultiLab 4010-2 - Manual (Page 23)

MultiLab 4010-2 Operation
ba76142e01 05/2013 23
 Messages
Information is marked by the [
i
] symbol. It cannot be selected. Example:
4.5.4 Example 1 on navigation: Setting the language
1. Press the key.
The measured value display appears.
The instrument is in the measuring mode.
2. Open the Storage & config menu with
_
>.
The instrument is in the setting mode.
Calibration record
Calibration data storage
Buffer:
YSI
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[ i ] 2.00 4.00 7.00 10.00
pH
03.04.2013 08:00
03.04.2013 08:00
Info
System
Data storage
Storage & config
03.04.2013 08:00