Xylem MultiLab 4010-2 - Manual (Page 19)

MultiLab 4010-2 Operation
ba76142e01 05/2013 19
4.2 Switching on the meter
4.3 Switching off the meter
4.4 Login with user name
After activation of the user administration by the administrator, measurements
are only possible after login with a user name. The user name is documented
with the measured values and in records.
All user names entered by the administrator are listed in the User name menu.
The administrator determines for each user whether or not a password is
required for the login to the meter.
If the Password menu item is grayed out, no password is required for the login.
1. Switch the meter on with .
The meter performs a self-test.
2. Connect the sensor.
The meter is ready to measure.
If the user administration function is activated, the Login dialog
appears after the meter is switched on (see section 4.4 L
OGIN WITH
USER NAME , page 19).
The user administration function is not active in the delivery condi-
tion.
1. Switch off the meter with .
1. Switch on the meter with .
The Login dialog appears.
03.04.2013 08:00 Info