Xylem MultiLab 4010-2 - Manual (Page 64)

Settings MultiLab 4010-2
64 ba76142e01 05/2013
* Brand names or trade names are trademarks of their respective owners protected
by law.
9.1.3 Calibration interval
The calibration evaluation is displayed as a sensor symbol.
After the QSC function has been enabled the sensor symbol is replaced by the
QSC scale (see section 5.2.8 QSC
FUNCTION
(
SENSOR QUALITY CONTROL
), page
40).
After the specified calibration interval has expired the sensor symbol or the
QSC scale flashes. It is still possible to measure.
20 Reagecon TEC * 2.000
4.010
7.000
10.000 25 °C
21 Reagecon 20 * 2.000
4.000
7.000
10.000
13.000 20 °C
22 Reagecon 25 * 2.000
4.000
7.000
10.000
13.000 25 °C
23 Chemsolute * 2.000
4.000
7.000
10.000 20 °C
24 USABlueBook * 4.000
7.000
10.000 25 °C
25 YSI * 4.000
7.000
10.000 25 °C
The buffers are selected in the menu, pH / / Calibration
/ Buffer (see section 9.1.1 S
ETTINGS FOR P H MEASUREMENTS , page
61).
To ensure the high measuring accuracy of the measuring system,
calibrate after the calibration interval has expired.
No. Buffer set * pH values at