Xylem MultiLab 4010-2 - Manual (Page 20)

Operation MultiLab 4010-2
20 ba76142e01 05/2013
Changing the
password
If the administrator has set up the access with password protection:
2. Using <><>, select the menu item, User name and confirm with
.
The user name is highlighted.
3. Using <><>, select a user name and confirm with .
The login is done immediately if no password is required.
If a sensor is connected the measured value display appears.
4. If a password is required:
Using <><>, select the menu item, Password and confirm with
.
The user specifies the password when he or she first logs in with a
user name.
A valid password consists of 4 digits.
The user can change the password with the next login.
5. Change the digit of the highlighted position with <><>.
Switch to the next position of the password with <><>.
When the password was completely entered, confirm with .
The login takes place. If a sensor is connected the measured value dis-
play appears.
User name Admin
Password ####
Change password
Login
03.04.2013 08:00
1. Switch on the meter with .
The Login dialog appears.
2. Using <><>, select the menu item, User name and confirm with
.
The user name is highlighted.
3. Using <><>, select a user name and confirm with .
4. Using <><>, select the menu item, Change password and confirm
with .