Armasight DARDROPBB05PAL1 Drone Pro 5x Digital Night Vision Riflescopes - Manual (Page 36)

36
the unit. Remove the cover.
2. Replace the batteries with two new ones (CR2016, 3V). Install the batteries, aligning their polarity
markings (+/-) with those embossed on the compartment.
3. Replace the cover and tighten the screws (A).
FIGURE 4-1. ADVANCED WIRELESS REMOTE CONTROL BATTERY INSTALLATION
A
4.4 RETURN INSTRUCTIONS
For service, repair or replacement, please email: [email protected].
To assist the Service Representative (SR) with determining if the item is repairable, please provide the
following information:
1. Serial Number of the defective item (engraved on bottom of the equipment).
2. Thorough description of the malfunction, defect or damage.
3. An explanation of how the malfunction, defect or damage occurred, if known.
If the SR determines that the item is under warranty or should be returned for repair, a Return Material
Authorization number (RMA#) will be provided.
When returning the Drone PRO for service or repair, the following procedures should be followed to
prevent any additional damage:
1. Make sure the Drone PRO is free of all contaminants such as dirt or any other foreign material.
2. Remove the batteries.
3. Place the cap over the objective lens.
4. Place the Drone PRO and accessories in the carrying case.
Place the Drone PRO and a copy of the test report or detailed description of the failure in a suitable
packing/shipping container. Mark the package with the RMA#. Ship the fastest, traceable, prepaid
means to:
Armasight Inc.
815 Dubuque Avenue
South San Francisco, CA 94080
USA.