Armasight DARDROPBB05PAL1 Drone Pro 5x Digital Night Vision Riflescopes - Manual (Page 28)

28
BrIgHTneSS “+”
BrIgHTneSS “–”
IMAge InverSIon
reTICLe pATTern
reTICLe InverSIon
FIGURE 3-15. SETTING BUTTONS
B. Select a reticle pattern
Shortly push the reticle pattern switch button the necessary number of times to select from a choice
of reticle patterns: “Dot”, “Small Crosshair”, “Big Crosshair”, “Crosshair with Dot”, “Circle”, “Circle with
Dot”, or “No Reticle” (Figure 3-16).
NOTE:
The reticles appear in the most recently saved position in the display.
FIGURE 3-16. RETICLE PATTERNS
DoT SMALL CroSSHAIr BIg CroSSHAIr
CroSSHAIr WITH DoT CIrCLe CIrCLe WITH DoT
C. Invert the reticle color.
Momentarily push the reticle inversion button to switch between black and white reticles.
D. After configuration is complete, save your settings by pushing the “save” combination of but-
tons (see Table 3.2).
9. To align the barrel of the weapon, place the reticle on the desired target. To allow for the bullet travel
(i.e. bullet drop, windage, and the target mobility), use the boresight adjustment buttons.
10. To operate the Drone PRO in short-time activation mode, turn the switch to the STB position (stand-
by). To activate the Drone PRO, hold down the remote control button. Release the button to deacti-
vate the Drone PRO.
CAUTION:
DO NOT leave the equipment activated when it is not in use.