Armasight DARDROPBB05PAL1 Drone Pro 5x Digital Night Vision Riflescopes - Manual (Page 32)

32
4
PREVENTIVE MAINTENANCE AND
TROUBLESHOOTING
4.1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES
4.1.1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Table 4-1 Preventive Maintenance Checks and Services (PMCS), has been provided so that you can keep
your equipment in good operating condition.
Perform functional tests in the order listed in Table 4-1.
Operating procedures are detailed in Chapter 3.
Explanation of Table Entries:
SEq NO. column. Sequence numbers are for reference and appear in the order required to perform
checks and services.
LOCATION/ITEM TO CHECK/SERVICE column. Indicates the location and the item to be checked or
serviced.
PROCEDURE column. Details the check/ service procedure.
NOT FULLY MISSION CAPABLE IF ... column. Indicates what faults will prevent your equipment from
operating successfully.
TABLE 4-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
SEq
NO.
LOCATION ITEM TO
CHECK/SERVICE
PROCEDURE
NOT FULLY MISSION
CAPABLE IF ...
PRE-OPERaTION ChECKS
1 Completeness Open storage/carrying case and inventory items by com-
paring them with the data specified in this manual.
Missing items.
2 Soft Carrying Case Shake out loose dirt or foreign material. Inspect for tears,
cuts, excess wear or damage.
3 Body Inspect for cracks or damage. Scratches and gouges are OK
if operation is not affected. Inspect for missing parts.
Clean as required.
Cracked or damaged. Missing parts.
4 Objective Lens Cap Inspect for cuts, tears and dirt.
Clean as required. Cap is torn or cut. Cap is not secured to
the housing of the lens.
5 Eyecup Inspect for cuts, tears and dirt. Inspect for torn, bent or im-
properly fitting eyecup.
Clean as required.
Cup is torn or cut.