Armasight NSCCOMINI139DA1 CO-Mini GEN 3+ Alpha MG Night Vision Mini Clip-On System - Manual (Page 3)

3
CAUTION:
• DO NOT dismantle the equipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature changes, and
electric shocks.
• DO NOT drop or hit the equipment.
• Protect the equipment from overexposure to light. DO NOT activate the equipment in day-
light with the objective lens cap removed; DO NOT aim the equipment at bright light sources
(fire, car headlights, lanterns, street lamps, room lights, etc.).
• DO NOT force the equipment controls past their stopping points.
• DO NOT leave the equipment activated during breaks in operation.
• Verify that the equipment is off before installing a battery.
• DO NOT store the equipment with the battery still in it.
• To avoid deformation or damage, remove the light suppressor from the CO-MINI before plac-
ing the equipment in storage.
• Thoroughly clean and dry each item before placing them into the storage case.
• Scope Mounting Systems are not recommended for installing the CO-MINI on firearms hav-
ing vigorous recoil (0.308 Win or stronger).
NOTES:
• The optical axes of the CO-MINI and day scope should align. The distance between the axes
should not exceed 2mm. If the difference in the axis heights of the CO-MINI and day scope
above the weapon rail exceeds 2mm, you will need to replace the day scope mounting rings
or monoblock.
• At operating temperatures below -20°C (-4°F), alkaline battery life will be severely reduced.
Under these conditions, the use of lithium battery is recommended.
• The equipment requires some level of ambient light (moonlight, starlight, etc.) to function
correctly.
• Performance of the device in nighttime conditions depends on the level of ambient light in
the environment. Please remember the following:
— The level of ambient light is reduced by the presence of clouds, shade, or objects that
block natural light (trees, buildings, etc.).
— The equipment is less effective when operated in shadows and other darkened areas.
— The equipment is less effective when operated in rain, fog, sleet, snow, dust or smoke.
— The equipment will not “see” through dense smoke.
• For the purpose of returning defective components, retain all packaging materials.