Armasight NSCCOMINI139DA1 CO-Mini GEN 3+ Alpha MG Night Vision Mini Clip-On System - Manual (Page 17)

17
ITEN NO. DESCRIPTION PART NO.
— Scope Mounting System 2 #41
A mounting system used to install the CO-MINI on the lenses of specified day
scopes. Includes a clamp with inserts that will fit 38 and 42mm diameters. ANAM000010
— Scope Mounting System 3 #42
A mounting system used to install the CO-MINI on the lenses of specified day
scopes. Includes a clamp with inserts for 46.7, 48, 48.7-49, 49.5 and 50mm fitting
diameters. ANAM000011
— Scope Mounting System 4 #43
A mounting system used to install the CO-MINI on the lenses of specified day
scopes. Includes a clamp with inserts for 56, 57 and 58.7mm fitting diameters. ANAM000012
— Scope Mounting System 6 #44
A mounting system used to install the CO-MINI on the lenses of specified day
scopes. Includes a clamp with inserts for 62mm fitting diameter. ANAM000013
5 Extended Rail Adapter #85
A mounting system used to install a day scope behind the CO-Mini on
a weapon, using a short-mounting Picatinny/ Weaver rail. ANAM000045
6 SKB Mil-Standard Hard Shipping/Storage Case
A protective case used for shipping/storage of the CO-MINI and its accessories. ANHC000004
2.5 KEY FEATURES
Converts your day scope, sight, or binoculars into night vision-capable devices
–
Mounts in front of any day scope with no re-zeroing required
–
Available in a variety of high-performing Gen 2+ and Gen 3 image intensifier tube options
–
Wireless remote control
–
Fixed-focus objective lens effective at distances further than 20m
–
Automatic and manual (CO-MINI MG only) gain control
–
Powered by a single AA or CR123A battery
–
Bright light cut-off system
–
Bright light cut-off and low battery indicators
–
Interrupting Time 60 minutes (optional feature)
–
Filled with dry nitrogen to prevent internal fogging
–
Mounts on Picatinny/ Weaver rail with a quick-release mount
–
Mounts on the lenses of specified day scopes with the optional adapters
–
Long-range IR850 illuminator
–
Mil Standard compliant
–
Limited two-year warranty
–
2.6 SYSTEM LIMITATIONS
The CO-MINI requires some ambient light (moonlight, starlight, etc.) to operate. Factors that can re-
duce natural night light and negatively affect the efficiency and operation of the CO-MINI include:
rain, fog, sleet, snow, and smoke; passing cloud cover and objects that produce shadows; low-contrast
environments such as snow-covered territory, sandy deserts, large bodies of water or grassy hills.
TABLE 2-10. CONTINUED