Armasight NSCCOMINI139DA1 CO-Mini GEN 3+ Alpha MG Night Vision Mini Clip-On System - Manual (Page 28)

28
3.3.4 SHUT-DOWN
Shut-down the CO-MINI as follows:
1. Turn off the device. The green glow will disappear.
2. Place the cap over the objective lens.
3. Remove the CO-MINI from the weapon/day scope lens.
4. Remove the light suppressor from the output lens.
5. Screw the cap into the output lens thread.
6. Remove the IR850 from the CO-MINI.
7. Remove the batteries.
CAUTION:
Do not store the equipment with the battery still in it.
CAUTION:
Remove the light suppressor from the CO-MINI to avoid deformation or damage.
8. Ensure that the CO-MINI and any accessories are clean and dry before placing them into the storage
case.
9. Place the CO-MINI and any accessories into the appropriate locations in the storage case and close
the cover.