8 show mac-address-table multicast – Asus GigaX2024B User Manual
Page 56

GigaX2024B/M L2 Managed Switch CLI Manual
36
interface IFLIST COS_DEST
Parameters
multicast
Multicast
MACADDR
Destination MAC address xxxx.xxxx.xxxx
(multicast) to the address table
vlan
Vlan
VLANID
Valid range is 1 ~ 3000
interface
the specified interface
IFLIST
Interface’s name list, ex: fa1/0/1-12
COS_DEST
Cos priority
Command Mode Configure terminal mode
No/clear
Show
Default
No static addresses are configured.
Description
Use the no mac-address-table multicast configuration command
on the switch stack or on a standalone switch to remove
multicast static port to the MAC address table.
Example
ASUS(config)# no mac-address-table multicast 0100.5e0a.0a0a
vlan 1 interface fa1/0/2-5 3
10.8 show mac-address-table multicast
Syntax
show mac-address-table multicast
Parameters
Command Mode Privileged EXEC mode
Default
None or depends on ODM customer
Description
Use the show mac-address-table multicast user EXEC
command to display the Layer 2 multicast entries for all VLANs.
Use the command in privileged EXEC mode to display specific
multicast entries.
Example
ASUS# show mac-address-table multicast