Asus GigaX2024B - Manual (Page 27)

GigaX2024B/M L2 Managed Switch CLI Manual
7
3. Static Link Aggregation
3.1 aggregation-link group <1-32> PORTLIST
GX2024B GROUPID range is 1-6
Syntax
aggregation-link trunk <1-32> PORTLIST
Parameters aggregation-link static trunk aggregation link information
group link trunk group
GROUPID Trunk group ID 1-32
Command Mode Configure terminal mode
No/clear
no aggregation-link group <1-32>
show show aggregation-link group <1-32>
Default None or depends on ODM customer
Description Use the aggregation-link trunk group configuration command
on the switch stack or standalone switch to configure trunk
aggregation group.
Example ASUS(config)#aggregation-link group 1 fa1/0/1-4
3.2 aggregation-link group <1-32> load-balance
(src-mac |dst-mac |src-dst-mac |src-ip |dst-ip |src-
dst-ip)
GX2024B GROUPID range is 1-6
Syntax
aggregation-link group <1-32> load-balance (src-mac |dst-mac
|src-dst-mac |src-ip |dst-ip |src-dst-ip)
Parameters GROUPID Trunk group ID 1-32
src-mac -> Source Mac address.
dst-mac -> Destination Mac address.
src-dst-mac -> Source and Destination Mac address.
src-ip -> Source IP address.