Asus GigaX2024B - Manual (Page 163)

GigaX2024B/M L2 Managed Switch CLI Manual
143
<2000-2699> Extended IP access-list number (expanded
range)
permit-> Specify packets to forward
deny-> Specify packets to reject.
Tcp-> Transmission Control Protocol
Udp-> User Datagram Protocol
IPADDR Source address
MASK Source wildcard bits
Any Any destination host
[IFNAME] Egress interface name
Command Mode Configure terminal mode
No/clear
no access-list (<100-199>|<2000-2699>) (deny|permit) (tcp|udp)
IPADDR MASK [eq] [<0-65535>] any [eq] [<0-65535>] [IFNAME]
Show Show acces-lists [number|name]
Default
Description
This command specify one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config)#access-list 100 permit tcp 1.1.1.1 0.0.0.0 eq 23
any eq 22
13.75 access-list (<100-199>|<2000-2699>)
(deny|permit) icmp IPADDR MASK any <0-255> code
<0-255> [IFNAME]
Syntax access-list (<100-199>|<2000-2699>) (deny|permit) icmp
IPADDR MASK any <0-255> code <0-255> [IFNAME]
Parameters Access-list Add an access list entry
<100-199> Extended IP access-list number
<2000-2699> Extended IP access-list number (expanded
range)
permit-> Specify packets to forward